Concrete Product Supplier in Flushing, NY: The Right Mix for Every Project
Wrong mix on a pour means cracking, failed inspections, and rework you pay for twice. We supply the specific concrete your job actually needs, batched to spec and delivered across NYC. Call (718) 939-3245 now.
🧱 Consistent Concrete Quality 🚚 On-Time Delivery 🤝 Supplier & Contractor Expertise 📍 Locally Owned & Operated
You've poured a mix that wasn't right for the job and watched it crack. You've had a supplier hand you "concrete" without asking what you were building. You've guessed at a PSI because nobody walked you through it. The wrong product on a pour is expensive, and on a structural job it can mean a failed inspection. We supply a full range of concrete products matched to what your project requires, from high-strength commercial mixes to flatwork for sidewalks and driveways. Call (718) 939-3245.
WHAT CONCRETE PRODUCT DO YOU NEED?
Most concrete failures trace back to a mismatch between the mix and the job. You're pouring a commercial foundation that needs to carry serious load, but you've been quoted a standard residential mix. You're replacing a sidewalk under a DOT mandate and the spec calls for a specific strength. You've got a structural slab where you want crack resistance built into the mix, not just hoped for. Or you're working on an elevated deck where the dead weight of standard concrete is a problem the engineer flagged.
These are different products, not different brands of the same thing. Compressive strength, aggregate, admixtures, and weight all change based on what you're building.
Picking the wrong one shows up later. According to Concrete Network, local building codes often set minimum compressive strength requirements for residential concrete, and weak concrete that can't meet those loads will crack and fail, leading to expensive repairs. The reverse is also true: over-specifying a high-strength mix where it isn't needed wastes money and makes the concrete harder to place.
In NYC, the stakes are higher. Structural pours fall under the NYC Building Code and must hit the compressive strength specified on engineered drawings, often 3,000 to 4,000 PSI for standard structural work and 5,000 PSI or more for commercial decks and foundations. Guessing at the mix isn't an option. DIY bagged products can't meet engineered specs or pass special inspection. The right move is to match the product to the project from the start, which is exactly what we help you do.
OUR CONCRETE PRODUCT SUPPLIER OPTIONS
We supply a full range of concrete products so your project gets the mix it actually needs. For projects carrying heavy structural load, our High-Strength Concrete Supply delivers the higher compressive strengths required for commercial foundations, podium decks, columns, and high-load slabs, the mixes NYC's active commercial development corridors demand.
When weight is the constraint, our Lightweight Concrete Supply reduces dead load for elevated decks, floor toppings, and applications where an engineer has flagged structural weight as a concern, without giving up the performance the job requires.
For pours where crack resistance matters, our Fiber-Reinforced Concrete Supply blends reinforcing fibers into the mix to help control shrinkage cracking and improve durability, useful for slabs, flatwork, and surfaces that take ongoing wear.
We also supply the flatwork mixes that keep NYC's sidewalks and driveways in service. Our Sidewalk Concrete Supply provides the standard-strength, air-entrained flatwork mixes specified for sidewalk repair and replacement throughout the boroughs, including DOT-mandated work. And our Driveway Concrete Supply delivers the right strength and freeze-thaw resistance for residential and commercial driveways that have to stand up to vehicle traffic and Northeast winters. Because we're a contractor as well as a supplier, we know what each of these products has to do once it's placed, and we stand behind all of them.
CONCRETE PRODUCTS FOR FLUSHING HOMES AND BUSINESSES
Flushing's building stock is dense and aging, much of it built between the 1920s and 1960s, which keeps demand steady for foundation repair, flatwork replacement, and underpinning pours. Those projects call for a range of products, not one generic mix.
The local conditions shape what we supply. Queens runs through full Northeast freeze-thaw cycles, so exterior flatwork, driveways, and slabs need air-entrained mixes to resist spalling and surface deterioration. Ongoing redevelopment along downtown Flushing corridors drives demand for high-strength commercial mixes on podium decks and foundations. NYC DOT sidewalk repair mandates generate steady, year-round demand for standard-strength flatwork pours. Proximity to Flushing Bay and high urban moisture levels also increase the need for low water-cement ratio mixes that protect against rebar corrosion. Each of these is a different product specification.
We supply throughout the boroughs of Queens, Brooklyn (except Coney Island), the Bronx, and Manhattan (except the West Side).
Not sure which mix your job needs? Call (718) 939-3245 and we'll help you spec it right.
We've been part of New York City's concrete industry for 55+ years, and both owners are third-generation professionals in the trade. As a family-owned business that's both a supplier and an active contractor, we use the same products we sell on our own job sites, so we stand behind the quality of every mix. Customers count on us because the staff answers the phone, gives clear answers on what mix fits the job, and delivers on time, even on short notice. We provide free estimates and run a 24/7 operation.
Looking for other Ready Mix Concrete Supplier services? We handle all your concrete supply and contracting needs, not just concrete products.
WHY CHOOSE US FOR CONCRETE PRODUCTS
OUR COMPLETE READY-MIX CONCRETE DELIVERY SERVICES
High-Strength Concrete Supply
Higher-compressive-strength mixes for commercial foundations, podium decks, columns, and high-load structural pours.
Sidewalk Concrete Supply
Standard-strength, air-entrained flatwork mixes for sidewalk repair and replacement, including DOT-mandated work.
Lightweight Concrete Supply
Reduced-weight concrete for elevated decks, floor toppings, and applications where dead load is a structural concern.
Driveway Concrete Supply
Durable, freeze-thaw resistant mixes for residential and commercial driveways that handle vehicle traffic.
Fiber-Reinforced Concrete Supply
Concrete blended with reinforcing fibers to control shrinkage cracking and improve durability for slabs and flatwork.
ALL BORO READY MIX FAQ’s
-
It depends on what you're pouring. Sidewalks, patios, and light flatwork often work at lower strengths, while standard residential driveways and foundations typically call for 3,000 to 4,000 PSI. Commercial decks, columns, and high-load structures may need 5,000 PSI or more. If your project has engineered drawings, the spec is listed there. Not sure? Call (718) 939-3245 and we'll help you confirm the right mix.
-
No. Higher-PSI concrete costs more and is harder to place, and there's little benefit to specifying strength beyond what the application requires. A sidewalk doesn't need a commercial-deck mix. The goal is matching the product to the load and exposure your project actually faces. We help you spec the right strength so you're not overpaying or under-building.
-
Fiber-reinforced concrete has reinforcing fibers blended into the mix to help control shrinkage cracking and improve durability. It's useful for slabs, flatwork, and surfaces that take ongoing wear. It doesn't replace structural rebar where engineering requires it, but it adds crack resistance to the mix itself. Tell us your application and we'll advise whether it fits.
-
Queens experiences full freeze-thaw cycles through the winter. Water absorbed into concrete expands when it freezes, and over repeated cycles this causes surface spalling and deterioration. Air-entrained mixes contain microscopic air voids that give that expansion somewhere to go, protecting the surface. We supply air-entrained flatwork mixes for driveways, sidewalks, and exterior slabs accordingly.
-
Yes. We batch concrete to the specifications listed on your engineered drawings, including required PSI, aggregate, and admixtures. Every delivery includes a batch ticket documenting the mix, which is the documentation your special inspector references during NYC DOB inspections. Send us your spec and we'll confirm we can supply it. Call (718) 939-3245.
-
Yes. We deliver across Queens, Brooklyn (except Coney Island), the Bronx, and Manhattan (except the West Side). Urban delivery conditions like narrow streets and tight site access are routine for us, and we offer pumping where chute access isn't possible. Call to confirm delivery for your address and get a free estimate.
DON'T POUR THE WRONG MIX TWICE
A mismatched mix cracks, fails inspection, or wears out years early, and on a structural pour the fix means tearing out and starting over. Get the right product the first time. Call (718) 939-3245 and we'll spec your concrete to the job before a single yard is batched.
Serving NYC’s Top Neighborhoods
All Boro Ready Mix Corp. delivers ready mix concrete, cement, brick, and concrete blocks across Queens (Bayside, Flushing, Forest Hills, Jamaica & more), Brooklyn (not Coney Island), the Bronx, and Manhattan (except the West Side). Fast, 24/7 service for contractors, homeowners, and trades.
CONTACT
3170 College Point Blvd
Flushing, NY 11354
PO Box 545464
Monday - Saturday
Open all day